Why this made the list
Most GaN chargers solve output wattage and stop there, leaving you to still carry a separate cable. This one builds a retractable USB-C cable and a real-time wattage display into the brick itself, aimed at replacing the whole charging kit, not just the wall wart.
What it actually does
It puts out up to 160W total across four ports: a built-in retractable USB-C cable rated up to 140-145W, two more USB-C ports, and one USB-A port, enough to charge four devices at once. The cable extends to about 70cm across eight length-stopper positions and is rated past 10,000 stretch cycles. A companion app controls per-port wattage and shows live voltage, temperature, and charging protocol on the built-in display. In real-world testing, it took an iPhone 16 Pro from 19 to 66 percent in 30 minutes.
Who this is actually for
Anyone charging multiple devices from one outlet who's tired of also managing a separate cable, especially at a desk or a hotel nightstand. Less of a fit for a minimalist who just wants a small, dumb brick, or anyone who'd rather not tie a charger to a companion app and account.
What to weigh before buying
- The retractable cable maxes out around 70cm extended, enough to reach a nearby device but not across a room, so it doesn't fully replace a longer cable for every setup.
- Bluetooth pairing to the companion app has been reported as inconsistent, sometimes taking more than one attempt to connect.
- It's noticeably bulkier and heavier than a basic GaN brick, and its shape can block an adjacent outlet on a standard wall plate.
- The smart display and per-port controls require creating a Ugreen account and connecting to Ugreen's servers, worth knowing if you'd rather keep charging hardware offline.
The verdict
A genuinely useful all-in-one for anyone charging several devices from a single outlet who wants the cable built in. Skip it if you just want the smallest possible brick or don't want a charger tied to an app.